Choose Side or Rear Cable Entry for Powerwall

Determine whether cables will be routed into Powerwall from the side or the back of the unit.

  • For side cable entry, a conduit fitting or cable gland must be used to seal the entry into the wiring compartment.
  • For back cable entry, a conduit fitting or cable gland is used to seal the entry into the wiring compartment.
Informational PurposesAn informational icon, calling your attention
Note
If Powerwall is mounted on a wall with studs spaced 24 inches (610 mm) apart, cable entry from the back of Powerwall may be blocked.