Current Transformer on Incorrect Phase

Locate the CT on the Meter page in Setup App.
Determine which phase the CT should be measuring.
Note
_{If using
Gateway CTs, the ports are CT 1 (Line 1), CT2, (Line 2), CT 3 (defaults to
Line 1 but can be configured as Line 2 in Setup App).}
Note
If using a Neurio meter, the ports are A (Line 1), B (Line 2), B (Line 2), A (Line 1) and are determined by voltage reference.
Verify the CT is measuring the correct phase.

Figure 1. Gateway CT Measuring Correct Phase (top) and Incorrect Phase (bottom)

Note

In the examples above, the CT is monitoring a solar inverter conductor, which is why only (1) CT is required.

Figure 2. Neurio W2 CT Measuring Correct Phase (top) and Incorrect Phase (bottom)

Note

In the examples above, the CT is monitoring a solar inverter conductor, which is why only (1) CT is required.