Powerwall System Configurations for Powershare Functionality

Powerwall systems with Powershare functionality require the following:

Equipment Tesla Part Number
Powerwall system See appropriate Powerwall installation manual for part numbers (see Installation Overview)
Tesla Universal Wall Connector or Gen 3 Wall Connector 1734412-xx-y or 1457768-xx-y
Tesla Powershare Compatible Vehicle Inverter 1999990-xx-y Cybertruck
2100145-xx-y Model Y1
Model 31
Note
The model numbers in this application note call out "-XX-Y" for the suffix of the equipment model number. The wild cards are defined as follows:
  • "X" is a number and the one number in the model number representing a style code; form, fit, and function are not changed, and these numbers have no bearing on compliance.
  • "Y" is a letter, and the one letter in the model number representing a pedigree; form, fit, and function are not changed, and this letter has no bearing on compliance.

Powershare Feature Availability

Configuration Powershare Feature(s) Tesla Powershare-Capable Vehicle Feature Availability
Powershare System with Powershare Gateway and Universal Wall Connector

Vehicle-to-Home (V2H)
Vehicle-to-Grid (V2G)

Cybertruck Available now (see Powershare System Installation Manual)
Powerwall 3 System with Universal or Gen 3 Wall Connector2, 3 Vehicle-to-Home (V2H)

Cybertruck
Model Y1
Model 31

Available now
Powerwall 2 or Powerwall+ System with Universal or Gen 3 Wall Connector2, 3 Can be installed now, Powershare feature coming soon

1All Model Y and Model 3 vehicles ordered in the U.S. and Puerto Rico after October 1, 2026 are capable of Powershare when paired with a Powerwall system. See the Powershare Support page for guidance to confirm if other Model 3 and Model Y vehicles are Powershare-capable.

2Powerwall is not compatible with Powershare Gateway. Do not install Powershare Gateway with a Powerwall system.

3A Powerwall system with Wall Connector does not require any additional equipment; Powershare functionality will be enabled during device setup. Do not attempt to run communication wiring between the Wall Connector and the Powerwall or Backup Gateway / Backup Switch

Note
The Wall Connector Group Power Management feature is not available when installing Wall Connector for Powershare.

Please note that Wall Connectors installed with Powerwall for Powershare are compatible with Dynamic Power Management.

System Diagrams

Whole Home Backup with Meter Load Center, with Powerwall 3 and Backup Switch
Partial Home Backup with Detached Meter and Main Panel, with Powerwall 3 and Gateway 3