10/12/2024 07:24:50

Maintenance

  1. Inspect the lifting screw:
    1. Apply grease to the lifting screw if needed (should be done annually or for every 250 Powerwalls installed, whichever comes first). To apply grease, use a small amount along the entire threaded surface of the screw, and cycle the carriage up and down a few times.
      Informational PurposesAn informational icon, calling your attention
      Note
      The recommended lifting screw grease is the McMaster 1243K31 Magnalube G as outlined in Serviceable Parts.
    2. Confirm the lifting screw is not bent.
    3. Confirm that only the Camco 3/4" hex socket is being used to run the lifting screw.
      Informational PurposesAn informational icon, calling your attention
      Note
      The recommended hex socket is the Camco 57363 3/4" hex socket as outlined in Serviceable Parts.
  2. Inspect the dolly tires:
    1. Fill the tires if needed (recommended pressure is 45 psi).
    1. Confirm the tires are free of debris and significant wear.