2025-03-31

Replacing the Lower Powerwall 2 Bumper

Tools and Equipment:

  • T20 Torx bit
  • Driver
  • Lower bumper

  1. Use a T20 Torx bit to remove the 3 x screws securing the lower bumper to the dolly. Remove the washers and the lower bumper.
  2. Place the new lower bumper on the dolly. Insert the washers into the channel and re-install the 3 x screws.

    Use the driver to install the screws, tightening just until they are secure. Do not overtighten the screws or drive them through the rubber.