2023-09-27

Step 7: Energize Wall Connector

  1. Energize the Wall Connector by turning on the upstream circuit breaker.
    Informational PurposesAn informational icon, calling your attention
    Note
    To energizing a leader/follower unit turn on the upstream circuit breaker, though multiple units will be fed by one breaker and multiple will turn on when the breaker is flipped.

    There's no difference in energizing a leader/follower unit except that multiple units will be fed by 1 breaker, so multiple will turn on when the breaker is flipped.

    Gen 3 Wall Connector

    The Wall Connector's LEDs will turn on. See Wall Connector LEDs.
  2. Proceed with commissioning.