Read all instructions before using this product. Save these
instructions.
This manual contains important instructions for the Universal Wall Connector
that shall be followed during installation, operation, and maintenance. Please review
all warnings and cautions before installing and using the Wall Connector.
Warning
When using electric
products, basic precautions should always be followed, including the
following.
INSTRUCTIONS RELATING TO RISK OF
FIRE OR ELECTRIC SHOCK
Warning
Do not install
or use the Wall Connector near flammable, explosive, harsh, or combustible
materials, chemicals, or vapors.
Warning
Turn off power
at the circuit breaker before installing or cleaning the Wall Connector.
WARNINGS
Warning
This product can
expose you to one or more chemicals that are known to the state of California to
cause cancer.
Warning
This device
should be supervised when used around children.
Warning
The Wall
Connector must be grounded through a permanent wiring system or an equipment-grounded
conductor.
Warning
Use the Wall
Connector only within the specified operating parameters.
Warning
Never spray
water or any other liquid directly at the wall mounted control box. Never spray
any liquid onto the charge handle or submerge the charge handle in liquid. Store
the charge handle in the dock to prevent unnecessary exposure to contamination
or moisture.
Warning
Do not use the
Wall Connector if it is defective, appears cracked, frayed, broken, or otherwise
damaged, or fails to operate.
Warning
Do not use the
Wall Connector if the flexible power cord or cable is frayed, broken, or
otherwise damaged, or fails to operate.
Warning
Do not attempt
to disassemble, repair, tamper with, or modify the Wall Connector. The Wall
Connector is not user serviceable. Contact Tesla for any repairs or
modification.
Warning
When
transporting the Wall Connector, handle with care. Do not subject it to strong
force or impact or pull, twist, tangle, drag, or step on the Wall Connector, to
prevent damage to it or any components.
Warning
Do not touch the
Wall Connector’s end terminals with fingers or sharp metallic objects, such as
wire, tools, or needles.
Warning
Do not insert
fingers or foreign objects into any part of the Wall Connector.
Warning
Do not
forcefully fold or apply pressure to any part of the Wall Connector or damage it
with sharp objects.
Warning
Use of the Wall
Connector may affect or impair the operation of any medical or implantable
electronic devices, such as an implantable cardiac pacemaker or an implantable
cardioverter defibrillator. Check with your electronic device manufacturer
concerning the effects that charging may have on such electronic devices before
using the Wall Connector.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful Interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
15.21 - Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
15.105 (b) - This equipment has been tested and found to comply with the limits for a
Class B digital device. pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more or the following measures:
Reorient or relocate the
receiving antenna.
Increase the separation
between the equipment and receiver.
Connect the equipment into an
outlet on a circuit different room that to which the receiver is
connected.
Consult the dealer or an
experienced radio/TV technician for help.
RF Exposure Information (MPE)
This device has been tested and meets applicable limits for Radio Frequency (RF)
exposure. This equipment should be installed and operated with minimum distance 20
cm between the radiator and your body.
ISED Canada Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with
Innovation. Science and Economic Development Canada's license-exempt RSS(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CAUTIONS
CAUTION
Do not use
private power generators as a power source for charging.
CAUTION
Incorrect
installation and testing of the Wall Connector could potentially damage the
vehicle's battery, components, and/or the Wall Connector itself. Any resulting
damage is excluded from the New Vehicle Limited Warranty and the Charging
Equipment Limited Warranty.
CAUTION
Do not operate
the Wall Connector in temperatures outside its operating range of -22˚ F to 122˚ F (-30˚ C to
50˚ C).
CAUTION
Wall Connector
should only be installed by personnel who are trained and qualified to work on
electrical systems.
CAUTION
Ensure that Wall Connector is within storage temperature when
moving, transporting, or storing.
Notes
Note
Ensure that the Wall Connector’s charging cable is positioned so it will not
be stepped on, driven over, tripped on, or subjected to damage or stress.
Note
Do not use cleaning solvents to clean any of the Wall Connector’s components.
The outside of the Wall Connector, the charging cable, and the connector end of
the charging cable should be periodically wiped with a clean, dry cloth to
remove accumulation of dirt and dust.
Note
: Be careful not to damage the circuit boards or components during
installation.
Note
Use a cable sheath or similar containment to cover the supply cables. The
color black is recommended.