Complete Registration

Installer Registration

Installer registration is an important step for tracking install quality, and it allows the installer (and partner(s) if applicable) to view the site in Powerhub.

Note

The site is only created in Powerhub after customer registration is completed. Installer registration allows the installing company to view the site in Powerhub, but customer registration must be completed for the site to exist in Powerhub.

Note

Once installer registration has been completed, it cannot be changed in Tesla One and instead must be updated by Install Support.

To complete installer registration:

Select Registration > Installer Info and enter your contact information.
1. In the Company Name field, verify that the name of the company performing the installation has automatically been filled in. If the company name is not present or is not correct, search for your company to select it.
  Note
  The Company Name is the field that links a partner to a site, meaning this is the field that allows a company to view the site in Powerhub.
  If you are not a Tesla Certified Installer, please select Unknown for the company name field, and then manually type your company name, if applicable.
2. In the Email field, leave the email address of the installer completing the installation. This email address is used to track Tesla Academy training completion and the Pro Score inside Tesla One.
To add a partner installer company:
1. Select Add Partner and search for the partner name to select it.
2. Repeat this step if needed (up to two partner companies can be added).
Note
This feature enables another company or entity to access the site in Powerhub. For instance, if another company is performing the installation, sold the system, owns the system, or distributes the hardware in region, they can be given Powerhub access to the site this way.
Note
If the site is not shared with partner companies during device setup, it can be shared using Powerhub. See Site Sharing in the Residential Powerhub User Manual for instructions to share the site with partners.
Select Continue to proceed to the customer registration.

Site Visibility in Powerhub

Tesla products appear in the Powerhub Fleet Monitoring Portal after Customer Registration is completed, and if the Company Name was present during commissioning per the above steps.

If a site is not visible in Powerhub:

Make sure the site was registered, meaning the customer can see it in their Tesla App.
Contact the company that installed the system (or a partner company with site sharing capability) and ask them to share the site in Powerhub. See Site Sharing in the Residential Powerhub User Manual for more information.

Customer Registration

Customer registration allows the customer to view their system in the Tesla app, and the customer’s product warranty is activated upon registration.

Tesla has two paths for customer registration:

Option 1 (Installer-Led Registration, preferred):
1. Select Enter Customer Info.
2. Enter the customer's email address, then select the Next button.
3. Complete the registration form.
  Note
  The customer email address entered during registration is the link between the product and the customer's Tesla account. Please ensure that the email address is entered correctly and is the one used by the customer for their Tesla account.
Option 2 (Customer-Led Registration): If the customer is available, select Show a code or Text the customer to allow the customer to enter their information. Both of these methods open the Tesla app to the Add Products page; the customer can also navigate to Add Products manually.

Note

If customer registration is not completed, the customer will not have access to the system in the mobile app. Ensure customer registration is completed!

Multi-Product Customer Registration

Each Wall Connector is separate, meaning each must be commissioned and registered individually. Failure to fully register all products will result in loss of Powerhub visibility, loss of customer app visibility, and unactivated warranties.

If a customer has multiple Tesla devices (Wall Connector(s) and/or Powerwall), all devices can be registered to the same site for simplified viewing in Powerhub (for the installer) and the Tesla app (for the customer).

Note

This feature can be used in the following installation scenarios:
- Adding multiple Wall Connectors to a single site
- Adding Wall Connector to a Powerwall site (or vice versa)
For complex edge cases, Tesla Support remains available to correct registration issues after the registration process is completed

Options for registering multiple devices to a single site:

Option 1 (Installer registers devices, preferred):
1. Register one of the devices.
2. For each subsequent device:
  1. Connect to the device in Tesla One and, during the registration step, enter the customer's email address.
  2. If the first device was registered within the last 24 hours by the same installer (using the same mobile device), the Add to Recent Site option will appear with the customer's registration information. Select this option.
  3. If the Add to Recent Site option is not available, select the Next button.
  4. Select the existing site.
    Note
    Existing sites belonging to the same customer email address and the installer's Powerhub instance will be displayed.
  5. Select Register.
Option 2 (Customer registers devices): Customers can register additional devices to their existing account using the Add Product page in the Tesla app.

If either of these options fails for any reason, to have them manually register the additional devices. Provide the following information:

Customer Name
Customer Address
Customer Email (associated with their Tesla Account, matching what was entered by the installer)
Already registered equipment DIN (Device Identification Number: Part Number & Serial Number
Additional DINs that need to be registered and added to the existing Site