In the Powerwall 3 Accessory Bag

Powerwall 3 Accessory Bag: Tesla P/N 1857363-30-x

  • (8) fasteners for mounting the Powerwall 3 front cover (Tesla P/N 1847553-00-A)
    Informational PurposesAn informational icon, calling your attention
    Note
    Early revisions of the front cover fasteners are single use; see STEP 12: Install Powerwall 3 Front Cover for instructions to remove the black gasket from these fasteners to reuse them. Only (6) fasteners are required, with (2) extra fasteners included in the accessory bag.
  • (7) PV wiring forked terminals
  • (1) small square clamp-on ferrite core with cable tie for the Tesla Asset Controller (TACO) low voltage harness
  • (2) medium clamp-on ferrite cores with cable ties for the AC conductors
  • (2) medium marked (with pink sticker) clamp-on ferrite cores with cable ties for the AC conductors
  • (1) small clamp-on ferrite core with cable tie for the Protective Earth