2024-06-20

Close Backup Gateway 2 Wiring Compartment

  1. Before closing any installed hardware, take photos of the completed wiring in the Powerwall, Backup Gateway 2, and main distribution board.
  2. Inspect the AC and PV wiring terminals to ensure all wire strands are properly inserted.
  3. Ensure that all conduit junctions and cable entry points are secure and properly sealed.
  4. Install the Backup Gateway deadfront panel and secure it firmly with the original screw. Mount the Backup Gateway door, and latch it shut.
    Figure 1. Install the Backup Gateway Deadfront Cover and Glass Door
    Informational PurposesAn informational icon, calling your attention
    Note
    If the Backup Gateway is installed outdoors or in a high-traffic area, the latch can be locked shut.
  5. Clearly label all circuit breakers.