Choose the Powerwall 3 Mounting Configuration

The following table outlines the approved mounting configurations for Powerwall 3. See Appendix A: Powerwall 3 Anchoring Details for which mounting configuration should be used depending on the seismic and wind speed conditions.

Table 1. Powerwall 3 Mounting Configurations

	Ground- or Wall-mount Powerwall 3 with Wall Bracket	Ground-mount Powerwall 3 on Poured Concrete	Ground-mount Powerwall 3 on Poured Concrete with Steel Posts
Wall and Foundation	Existing structural wall and existing approved foundation	Existing structural wall and poured concrete foundation	Poured concrete foundation with steel posts
Installation Information	Installation instructions	Installation instructions	Installation instructions and anchoring details
	Anchoring details	Anchoring details

Choose a Wall Capable of Supporting Powerwall 3

Choose a wall capable of supporting the full weight of Powerwall 3. Walls with the following characteristics are acceptable:

• Wood studs at regular intervals
• Solid concrete or masonry

Other wall types are also acceptable depending on mounting configuration; see Powerwall 3 Wall Bracket Anchoring Details for Wall-mounting or Ground-mounting on Approved Foundation for all acceptable wall types when mounting Powerwall 3 on the mounting bracket.

If ground-mounting Powerwall, choose a level surface adjacent to a wall space that meets the above requirements. Ensure the bearing surface is structurally sound and flat, and supports both Powerwall feet.