Powerwall 3 Accessory Bag: Tesla P/N 1857363-00-x

• (8) M6x17 fasteners for mounting the Powerwall 3 front cover (Tesla P/N 1847553-00-A)
  Note

  Early revisions of the front cover fasteners are single use; see Close Wiring Compartments for instructions to remove the black gasket from these fasteners to reuse them. Only (6) fasteners are required, with (2) extra fasteners included in the accessory bag.
• MPPT jumpers:
  • Powerwall 3 P/N 1707000-11-L or 1707000-21-L: (3) MPPT jumpers (Tesla P/N 2009322-xx-y)
  • All other Powerwall 3 units: (6) MPPT jumpers (Tesla P/N 1784893-xx-y)
  Note

  These jumpers are not interchangeable. Only install the jumpers that ship with the unit.
• (2) cable tie mounts
• (1) small clamp-on ferrite core for the Tesla Asset Controller (TACO) low voltage harness
• Powerwall 3 P/N 1707000-11-L or 1707000-21-L: (1) large clamp-on ferrite core with (1) cable tie for the AC conductors
• Powerwall 3 P/N 1707000-00-H and lower: (2) large clamp-on ferrite cores with (2) cable ties for the AC and PV conductors