Required Tools
- Personal protective equipment (safety glasses, gloves, protective footwear)
- Drill and drill bit for drilling pilot holes in mounting surface (5/32” bit for wood studs)
- Minimum ¼" mounting screws
- T30 drive screwdriver for securing the inverter to the bracket
- Up to 3.2 mm or 1/8-inch cabinet tip or electronics tip style slotted screwdriver (for wiring connector spring terminals)
- Wire strippers/cutters for 24 AWG to 6 AWG (0.2 mm2 to 16 mm2) wires
- Socket wrench and 8 mm socket for securing grounding strap to enclosure door
- Installation tools (level, stud sensor, tape measure, pencil, flashlight)
- Multimeter
- Digital camera or smartphone for documenting the installation