Launch Device Setup in Tesla One

  1. Launch the Tesla One app and log in with your Tesla Partner Portal account credentials.
    Informational PurposesAn informational icon, calling your attention
    Note
    See Install / Update Tesla One for instructions to install Tesla One if it has not already been installed on the commissioning device.
  2. Select Begin Install > Scan QR Code.
  3. Alternatively, you can select More > Tesla Device Setup > Scan QR Code.
  4. Scan the QR code on to join its Wi-Fi network and launch device setup.
    Informational PurposesAn informational icon, calling your attention
    Note
    Apple users may be prompted to allow Tesla One to find and connect to devices on the local network. Select Allow or OK, as this is required to join the Wi-Fi network.
    Informational PurposesAn informational icon, calling your attention
    Note
    Android users may be prompted to allow location consent. Select Allow all the time or Allow only while using the app, as this is required to allow Tesla One to find and connect to devices.