Always terminate DC wires at the Solar Inverter before connecting them to the solar panels.

When the PV array is exposed to sunlight, a dangerous DC voltage is generated in the DC conductors. Touching the live components of these conductors can lead to lethal electric shocks.

Unplugging the slot-in DC conductors from the terminals when the Solar Inverter is under load may cause an electric arc, which can result in electric shock and/or burns.

Do not touch any live components on the Solar Inverter.

Prior to performing any work on the Solar Inverter, disconnect it from AC voltage sources, as described in Appendix H: Servicing Solar Inverter.

The Solar Inverter DC inputs are not intended for connection to a battery or any other type of DC source except for a PV array.

Refer to Appendix B: Wiring Reference for an overview of the wiring compartment as well as all wiring requirements and recommendations, including wire colors and gauges.