06/02/2023 16:43:48

Finish and Demonstrate the Installation

  1. After installation is complete, remove the protective film from Powerwall+.
  2. Remove any packaging materials.
  3. Ask the homeowner to download and install the Tesla mobile app and connect to the system.
  4. Demonstrate the capabilities of the Tesla mobile app, such as how to change the operation mode.
  5. Leave the Powerwall+ Owner’s Manual with the owner of the newly installed system.
  6. Leave the Powerwall+ breaker closed (ON) and turn the Powerwall+ Enable switch ON.
    Figure 1. Powerwall+ Breaker ON (left) and Enable Switch ON (right)
  7. Archive the photos from the installation.