| 1.0 |
2021-04-20 |
Initial release |
| 1.1 |
2021-05-16 |
- Updated Backup Switch installation sequence
- Added System Metering appendix
|
| 1.2 |
2021-06-01 |
- Updated multi-Powerwall+ wiring instructions
- Corrected minimum fastener size in Mounting Bracket Anchoring
Details
|
| 1.3 |
2021-06-04 |
- Added UL 1741 PCS requirements
|
| 1.4 |
2021-06-23 |
|
| 1.5 |
2021-06-27 |
|
| 1.6 |
2021-08-05 |
|
| 1.7 |
2021-08-23 |
|
| 1.8 |
2021-10-12 |
- Updated with latest Compliance information
- Added instructions for multi-Powerwall+ installations
|
| 1.9 |
2021-11-03 |
|
| 1.10 |
2021-11-09 |
Added instructions to test meter socket using Tesco Hot Socket Gap
Indicator tool to Inspect the Meter and Meter Socket |
| 1.11 |
2021-12-03 |
|
| 1.12 |
2022-01-12 |
|
| 1.13 |
2022-02-16 |
- Updated Backup Switch Specifications to reflect a maximum short circuit current
rating of 22 kA with a breaker size that is equal to or greater
than the available fault current
- Updated Stacked Installations to reflect that Powerwall+ can be stacked with only one Powerwall
- Corrected type
and size of screwdriver required to spring wiring terminals for
Powerwall+ AC and DC
wiring terminals (up to 3.2 mm or 1/8-inch cabinet tip or
electronics tip slotted screwdriver) and communications wiring
terminals (up to 3 mm or 3/32-inch cabinet tip or electronics
tip slotted screwdriver)
- Updated Install Mid-Circuit Interrupters in PV Array to reflect that systems using certified PV
modules and mounting systems are covered by Tesla's UL 3741
certification if they are in compliance with the PVHCS listing
instructions
|
| 1.14 |
07-11-2022 |
|
| 1.15 |
01-03-2023 |
|
| 1.16 |
03-03-2023 |
|
| 1.17 |
04-21-2023 |
|
| 1.18 |
06-20-2023 |
|
| 1.19 |
08-31-2023 |
|
| 1.20 |
10-12-2023 |
|
| 1.21 |
01-16-2024 |
|
| 1.22 |
03-17-2024 |
|
| 1.23 |
04-29-2024 |
|
| 1.24 |
07-02-2024 |
|
| 1.25 |
07-24-2024 |
|
| 1.26 |
10-25-2024 |
|