06/02/2023 16:43:01

Anchor the Powerwall+ Mounting Brackets

Informational PurposesAn informational icon, calling your attention
Note
For additional information on mounting Powerwall+, including minimum spacing requirements, refer to Appendix A: Powerwall+ Mounting Details.
  1. Using the bracket measurements below for reference, plan the position of the brackets before mounting. Note that alignment of the battery assembly and solar assembly to the brackets is critical in installing Powerwall+; if each assembly is not properly aligned with its bracket, the installation cannot be completed.
    Informational PurposesAn informational icon, calling your attention
    Note
    When measuring from the top of the battery assembly bracket, measure from the metal edge of the bracket, not the rubber bumpers.
  2. Using a drill and level, mount the battery assembly bracket to the selected wall. See Mounting Bracket Anchoring Details for additional details on the type and number of fasteners to use.
    Figure 1. Mount Battery Assembly Bracket
  3. Align the solar assembly bracket to the battery assembly bracket using the alignment pin. Using a drill and level, mount the solar assembly bracket to the battery assembly bracket and wall. See Mounting Bracket Anchoring Details for additional details on the type and number of fasteners to use.
  4. Install the provided square nut over the alignment pin and tighten it by hand.