Mid Circuit Interrupter Specifications (P/N MCI-2) PV Rapid Shutdown Equipment (PVRSE)
Electrical Specifications
Note
MCI-2 and MCI-2 High Current are referred to collectively as MCI-2, as the only differences between the
two variants are the IMP and ISC ratings.
| MCI-2 | MCI-2 High Current | |
|---|---|---|
| Nominal Input DC Current (IMP) | 13 A | 15 A |
| Maximum Input Short Circuit Current (ISC) | 17 A | 19 A |
| Maximum System Voltage | 1000 V DC1 | |
| Maximum Disconnect Voltage | 165 V DC2 | |
1Maximum System Voltage is limited by Powerwall+ to 600 V DC.
2Maximum Disconnect Voltage is the maximum voltage allowed across each MCI in the open position (Rapid Shutdown Initiated). An individual MCI-2 has a voltage rating of 165 V but in combination (connected in the same string) their voltage ratings are additive.
RSD Module Interface
| Maximum MCI per String | 5 |
| Control | Power Line Excitation |
| Passive State | Normally open |
| Maximum Power Consumption | 7 W |
Compliance Information
| Certifications | UL 1741 PVRSE, UL 3741, PVRSA (Photovoltaic Rapid Shutdown Array) |
| RSD Initiation Method | External System Shutdown Switch |
| UL 3741/PVRSA Compatible Equipment | Refer to the UL 3741 Application Addendum |
Environmental Specifications
| Ambient Temperature | -49°F to 158°F (-45°C to 70°C) |
| Enclosure Rating | NEMA 4X / IP65 |
Mechanical Specifications
| Electrical Connections | MC4 or MC4-EVO2 Connector |
| Housing | Plastic |
| Dimensions | 0.9 x 6.8 x 1.8 inches (22 x 173 x 45 mm) |
| Weight | 0.26 lb (129 g) |