Appendix E: Module Servicing

  1. Maintain ground path.

    In the event a module must be removed for servicing, use additional Ground Zeps as needed to ensure the ground path is maintained.

  2. Disconnect module wires and jumpers.
  3. Release outer modules.

    Remove all Interlocks at the top of the column containing the target module, or module needing replacement. Remove the first module by lifting it up at a 15 degree angle and pulling it off the front Leveling Feet and Interlocks.4.

  4. Release mid-array modules.
    Use the Flat Tool to unlock the mid-array Interlocks and release the modules.
  5. Re-assemble array.

    Replace modules, Leveling Feet, and Interlocks until the array is complete. Use the Flat Tool to fasten mid-array Interlocks.