STEP 10: Complete the Remaining Modules

  1. Rock in the module.
    At the top of the second row, rock the module onto the Tongue side of the Cam Foot Rockit(s) and the Key side of the Interlock.
  2. Engage and secure the Cam Feet.

    Before completely lowering the module, engage Cam Foot(s) at the back of the module where it will meet its respective Rail. Fully secure the Cam Foot(s).

  3. Drop in the next module and install the Interlock.
    Drop in the next module, then install an Interlock onto the backs of the two modules.
  4. Repeat until the array is complete.