Powerwall 3 Battery Issues Common issues with Powerwall or the battery portions of Powerwall+ or Powerwall 3 Powerwall 3 Displaying 0% State of Energy Powerwall 3 State of Energy (SOE) percentage shows 0% on the landing page and/or Powerwall 3 is not chargingPowerwall 3 Discharge is Fluctuating Powerwall 3 is displaying rapid spikes of charging and dischargingPowerwall 3 is Discharging at Full Power Powerwall 3 is discharging at its maximum discharge, and the site reading increases as Powerwall 3 dischargesPowerwall 3 is Not Charging from Solar Powerwall 3 in Self-Consumption mode is not charging even though solar is producingPowerwall 3 Fails to Provide Backup Power to All LoadsWhen providing backup power, the Powerwall system is overloaded and Powerwall 3 does not power backup loadsGrid Reconnection Took Too LongWhen the grid returns, the Powerwall 3 system stays disconnected for an extended period of time, keeping loads powered by Powerwall and not the gridHigh Impedance IssuesAfter completing device setup, Powerwall 3 intermittently pushes power OR a periodic relay switching noise can be heard from inside Powerwall 3Parent topic: Installation Troubleshooting