Plan the Installation Site

Wall Connector may be installed on any flat, vertical surface capable of supporting its weight (e.g. wall, pedestal, etc.). Wall Connector weighs ~13lbs (5.7kg).

Choose Location

Install Wall Connector in a location that allows the charge cable to reach the vehicle charge port without putting strain on the cable. Recommended installation area for Wall Connectors with 24 ft (7.3 m) cable:
Install Wall Connector in a location with ample clearance on all sides to allow the charge cable to loop around the unit and the charge handle to comfortably land in the side dock.

Choose Height

  • Maximum height (indoor and outdoor): 60 in (1.52 m)
  • Recommended height: ~45 in (~1.15 m)
  • Minimum outdoor height: 24 in (0.6 m)
  • Minimum indoor height: 18 in (0.45 m)

Maximizing Wi-Fi Signal Reception

Wall Connectors should be connected to a local Wi-Fi network for optimal functionality. For maximum signal reception, avoid installing Wall Connector on opposite sides of concrete, masonry, metal studs, and other physical obstructions that could impede Wi-Fi signal reception.
Informational PurposesAn informational icon, calling your attention
Note
If a mobile device is able to connect to local Wi-Fi at a given location, it is a good indication that Wall Connector will also be able to connect.

Wire Entry Options

Wall Connector's wirebox has multiple wire entry options. Choose one entry path and follow installation instructions based on chosen entry path.

  1. Top entry location
  2. Rear entry locations (left or right)
  3. Bottom entry location