2024-03-05

Route Wiring Through Wirebox

  1. Route wiring into selected entry point and through the service loop channel on the right side of the wirebox.
    Top Entry Bottom Entry
    Rear Left Entry Rear Right Entry
  2. Use appropriate cable glands, bushings, or fittings to secure the wiring in place and protect from water and debris intrusion.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Ensure that bushings are in place to avoid damage to conductors and ground wire when pulled into wirebox.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Use copper conductors only.
    Informational PurposesAn informational icon, calling your attention
    Note
    Compression-style fittings are recommended to prevent interference.
    Informational PurposesAn informational icon, calling your attention
    Note
    For top or bottom wire entry, if installing fittings with a set screw, ensure that the screw is positioned to avoid interference with Wall Connector cables.