Light Codes
Startup
After Startup
After Wall Connector is energized at the circuit breaker, certain green LEDs
(depending on the circuit breaker size) will illuminate for 10 seconds. See table below for
exact light codes.
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |
Circuit breaker | 60 A | 50 A | 40 A | 30 A | 20 A | 15 A |
Maximum output | 48 A | 40 A | 32 A | 24 A | 16 A | 12 A |
Note
Breakers smaller than 30A are not
recommended for Powershare systems.
Note
To re-display the green LEDs after the
initial 10 seconds, press and hold the charging handle button.
When multiple Wall Connectors are linked for group power management, the center blue LED will illuminate during the 10-second startup window.
Other
Standby, waiting to plug in | Charging in progress | SSID broadcasting, ready to commission | Waiting to charge, communicating with vehicle |
---|---|---|---|
Top green solid | Every green streaming | Green pulsing | Blue solid |
![]() |
![]() |
![]() |
![]() |