Current Transformer on Incorrect Phase

Locate the CT on the Meter page in the Device Setup interface in Tesla One.
Determine which phase the CT should be measuring.
- Backup Gateway 2 with Tesla 100 A CTs:
  CT1 Line 1
  CT2 Line 2
  CT3 Defaults to Line 1 but can be configured as Line 2 during device setup in Tesla One
- Neurio Remote Energy Meter with Neurio CTs:
  CT1 Line 1
  CT2 Line 2
  CT3 Line 2
  CT4 Line 1
Verify the CT is measuring the correct phase.

Figure 1. Backup Gateway 2 with Tesla 100A CT: Correct Phase (top) and Incorrect Phase (bottom)

Note

In the examples above, the CT is monitoring a solar inverter conductor, which is why only (1) CT is required.

Figure 2. Neurio W2 CT Measuring Correct Phase (top) and Incorrect Phase (bottom)

Note

In the examples above, the CT is monitoring a solar inverter conductor, which is why only (1) CT is required.