Powerwall / Powerwall+ Battery Issues Common issues with Powerwall or the battery portions of Powerwall+ Powerwall / Powerwall+ Displaying 0% State of Energy Powerwall / Powerwall+ State of Energy (SOE) percentage shows 0% on the landing page and/or Powerwall / Powerwall+ is not chargingPowerwall / Powerwall+ Discharge is FluctuatingPowerwall / Powerwall+ is displaying rapid spikes of charging and dischargingPowerwall / Powerwall+ is Discharging at Full Power Powerwall / Powerwall+ is discharging at its maximum discharge, and the site reading increases as Powerwall / Powerwall+ dischargesPowerwall / Powerwall+ is Not Charging from SolarPowerwall / Powerwall+ in Self-Consumption mode is not charging even though solar is producingPowerwall / Powerwall+ is Charging from Grid Rather than Available SolarPowerwall / Powerwall+ is charging from the grid even though solar production is presentPowerwall / Powerwall+ Fails to Provide Backup Power to All LoadsWhen providing backup power, the Powerwall system is overloaded and Powerwall / Powerwall+ does not power backup loadsGrid Reconnection Took Too LongWhen the grid returns, the Powerwall / Powerwall+ system stays disconnected for an extended period of time, keeping loads powered by Powerwall and not the gridHigh Impedance IssuesAfter completing device setup, Powerwall / Powerwall+ intermittently pushes power OR a periodic relay switching noise can be heard from inside Powerwall / Powerwall+Parent topic: Installation Troubleshooting